Xylem 6308DT INDUSTRIAL DISSOLVED OXYGEN TRANSMITTERS - Manual (Page 5)

Global Water
800-876-1172
• globalw.com
- 5 -
III) Using the Global Water Model 6308DT
a) Front Panel
1. The [MODE/-] key.
(a) In Normal mode, this key will change the DO display to DO % or
DO ppm.
(b) In Calibration / Setting mode, this key will move to the next digit of
the current active parameter.
(c) In Calibration/ Setting mode, pressing this key for 2 seconds will
move you back to the previous parameter.
2. The [CAL/VIEW] key.
(a) In Normal mode, the display will go to Calibration / Setting mode if
you press this key for about 2 seconds
(b) During Calibration/Setting mode, this key will switch to the next
available Calibration/Setting page. Pressing this key at the last
Calibration / Setting page will return the user to the Normal mode.