Function keys – Xylem CONNECT Quick Guide User Manual
Page 7
7
Function Keys
The daily operation of Connect
®
and Mµ Connect
®
is done through the built-in
function keys 1-9.
The function keys (numerical keyboard) is also used for direct menu selection
and typing names and texts.
Each function key has pre-defined views and can be customized as needed.
Function keys 1 to 3 have the following functions:
The function keys 1 to 3 are only shown when “Create Overview Screen” in
the function menu has been done.
When selecting Index, an over-
view of the defined overview
screens are created. Use this
screen to make a quick switch
to the selected screen.
Pump Control 1
. This screen is a
standard screen for Connect
®.
This screen shows current level, pump
1 operating condition and first set of
start/stop levels
Pump Control 2
. This screen is a
standard screen for Connect
®
This screen shows current level, pump
1 operating condition and first set of
start/stop levels