Xylem MY CONNECT HMI display - Manual (Page 39)

MANUAL
HMI display
39
Pump configuration - 3
Delay of high-level signal (float-switch)
The delay is specified in seconds. Select to adjust.
Menu Item Option Default Description
Dynamic level offset Select to
adjust
0,00 Level setpoint displacement.
Dynamic level start
time hh:mm 00:00 Start time for setpoint displacement in hours and minutes. Select to
adjust.
Dynamic level stop
time hh:mm 00:00 Stop time for setpoint displacement in hours and minutes. Select to
adjust.
Periodic pumping
by P1/P2 OFF/P1/
P2 OFF Select the pump for periodic depth pumping. Select to adjust.
Periodic pumping
time Select to
adjust 0 Adjust runtime (in seconds) for periodic depth pumping.
Periodic pump
(every xx starts) Select to
adjust 0 Number of starts between periodic depth pumping.