Signal names which may be combined with m1 to m4 – Xylem CHATTER Notification System configuration guide User Manual
Page 40
MANUAL
GB CHATTER NOTIFICATION CONFIGURATION 1303
40
C1-
The counter on digital input no. 1
C2-
The counter on digital input no. 2
C3-
The counter on digital input no. 3
C4-
The counter on digital input no. 4
A1-
Analog input no. 1
A2-
Analog input no. 2
A3-
Analog input no. 3
A4-
Analog input no. 4
M1-
Modbus input no. 1
M2-
Modbus input no. 2
M3-
Modbus input no. 3
M4-
Modbus input no. 4
IN-
Internal measurement or internal data
ST-
Data from STORMFLOW plug-in
Signal names and associated pointers are only valid for the SCADA-systems mentioned in the right hand
column in the table below.
Signal names which may be combined with M1 to M4
Signal name
Pointer
SCADA-system notes
LEVEL
TEMP
7-Technologies IGSS32
Output value
type
VALUE
Formatted by
GE Proficy iFix version 5 Historian
Output value
type
SingleFloat
Formatted by
BV Electronics System 2000
Output value
type
Integer
Formatted by
17
17
34
34
34