Xylem Lowara Servitec Degassing Unit OMI - Manual (Page 10)

10
Messages are indicated on the display by the “info” symbol. At the same time, “Er” and the relevant
error code (e.g. Er 06) are shown on the info display. If there are several messages present, these may
be displayed using the symbols.
Most of the messages are automatically acknowledged once the cause has been remedied (see
table). Errors such as “Make-up time 06” or “Make-up cycle 07” must be acknowledged manually.
For remote transmission, it is possible to use the floating changeover switch for the common message.
In the customer menu, you can select whether only those messages characterized as alarms or all
messages should be output using the floating contact.
Messages
9
9