Extron Electronics MAV Plus Series User Guide User Manual
Page 43
d
Preset button — The Preset button has two primary functions (
❏
) and three secondary
functions (
•
):
❏
Activates
Save Preset mode to save a configuration as a preset and Recall Preset
mode to activate a previously-defined preset.
❏
Blinks when Save Preset mode is active and lights steadily when Recall Preset
mode is active.
•
In the I/O Group mode, select group 2 and indicate the selection.
•
With the Enter, View, and Esc buttons, selects Serial Port Selection and
Configuration mode.
•
Selects 19200 baud for the rear panel Remote port in Serial Port Selection and
Configuration mode and indicates the selection.
e
View (<) button — The View (<) button has one primary function (
❏
) and six
secondary functions (
•
):
❏
Select and indicate View-only mode, which displays the current configuration.
NOTE: View-only mode also provides a way to mute and unmute the outputs.
•
In the I/O Group mode, select group 3 and indicate the selection.
•
(
CrossPoint switchers) Decrease the RGB delay of switches to the selected
output.
•
(
Audio models) Decreases the audio level of the selected analog input.
•
(
Audio models) Decreases the volume of the selected analog output.
•
With the Enter, Preset, and Esc buttons, selects Serial Port Selection and
Configuration mode.
•
Selects 38400 baud for the rear panel Remote port in Serial Port Selection and
Configuration mode, and indicates the selection.
f
Esc (>) button — The Esc (>) button has two primary functions (
❏
) and six secondary
functions (
•
):
❏
Cancels operations or selections in progress and resets the front panel button
indicators.
❏
Flashes once to indicate that the escape function has been activated.
•
In the I/O Group mode, select group 4 and indicate the selection.
•
(
CrossPoint switchers) Increase the RGB delay of switches to the selected
output.
•
(
Audio models) Increases the audio level of the selected analog input.
•
(
Audio models) Increases the volume of the selected analog output.
•
With the Enter, Preset, and View buttons, selects Serial Port Selection and
Configuration mode.
•
Selects 115200 baud for the rear panel Remote port in Serial Port Selection and
Configuration mode and indicates the selection.
CrossPoint and MAV Series Matrix Switchers • Operation
37