Installing the cs 120p in a hard ceiling, Installing cs 120p in a hard ceiling – Extron Electronics CS 120P User Guide User Manual

Page 32

Advertising
background image

Installing the CS 120P in a Hard Ceiling

If you are installing the CS 1226T in a hard ceiling (having no ceiling tiles), with the ceiling
structure in place, install the CS 120P:

•

It is the responsibility of the installer to identify a suitable mounting location and provide
the mounting hardware.

•

The CS 120P must be mounted as close as possible to the upper surface of the ceiling
material.

•

The lip of the CS 120P should protrude into the hole cut for the speaker.

•

Do not leave a gap between the CS 120P and the ceiling material.

NOTE: Installation in this type of ceiling must be done while access to the ceiling is

still possible.

CS 26T and CS 120P User Guide • Installation

26

Advertising
This manual is related to the following products: