Installation, Installation considerations, Installation configurations – Extron Electronics CS 120P User Guide User Manual

Page 9

Advertising
background image

Installation

This section provides instructions for installing the CS 26T speakers and the CS 120P
enclosure. Topics include:

•

Installation Considerations

•

Installation Configurations

•

Installing the CS 1226T — Single Installer

•

Installing the CS 120P in a Suspended Ceiling — Division of Labor

•

Installing the CS 26T in a Suspended Ceiling — Division of Labor

•

Installing CS 120P in a Hard Ceiling

Installation Considerations

WARNING: Risk of severe bodily injury from falling or sharp equipment.

Installation and service must be performed by authorized personnel only.

•

All wiring and electrical connections must conform to all applicable building codes and
local ordinances.

•

Installation in a plenum-rated environment requires plenum rated cable or conduit.

•

If using secondary support cables, the installer provides the cables.

Installation Configurations

The CS 26T can be configured in the following ways:

•

Open-back: For configurations in which the CS 120P is not used, use the C-ring
accessory, available at

www.extron.com

. The C-ring spreads out the clamping force of

the dog-legs when used in drop ceilings and gypsum ceilings.

•

Using the CS 120P: When used with the CS 120P, the CS 26T can be placed in
plenum environments. This is the only configuration that is UL 2043 rated.

NOTE: The CS 120P can be ordered separately or as part of the CS 1226T kit.

For hard ceiling installations, see

Installing the CS 120P in a Hard Ceiling

on

page 26.

CS 26T and CS 120P User Guide • Installation

3

Advertising
This manual is related to the following products: