Extron Electronics DTP HDMI 230 D User Guide - Manual (Page 15)

DTP HDMI 230 D Transmitter and Receiver • Installation and Operation 9
Receiver Front Panel
Figure 8 shows the front panel of the DTP HDMI 230 D receiver.
OUTPUTS
AUDIO
Tx Rx G Tx Rx
RS-232 IR
OVER DTP
1
2
3
Figure 8. DTP HDMI 230 D Receiver Front Panel Connectors
a
HDMI output connector — Connect an HDMI display for the transmitted direct digital
image.
b
Audio output connector — Connect a stereo audio device to this 3.5 mm mini stereo
jack to receive the unbalanced audio output (see
figure 5 on page 7 for wiring details).
c
RS-232 and IR (control) pass-through connector — Connect a serial
communications port to this 3.5 mm, 5-pole captive screw connector for bidirectional
RS-232 communication (see
RS-232 and IR Connector Wiring on page 12 to wire
the connector).
NOTE: The RS-232 connector can also transmit one-way modulated infrared (IR)
signals.