Extron Electronics DSC HD-3G A User Guide - Manual (Page 49)

Symbol Definitions
• = Space
] = Carriage return with line feed
} or ¦ = Carriage return with no line feed
E or W = Escape
24 = Superscripts indicate the error message displayed if the command is entered incorrectly
or with invalid parameters (see
Error Responses on page 42).
*NOTE: Values with an asterisk ( * ) depend on the resolution.
X@ = Input video format for DSC 3G-HD A:
0 = No signal detected on the current input
1 = SD – 480i
2 = SD – 576i
3 = HD – 480p, 576p, 720p, 1080i, 1080p (up to 30 Hz)
4 = 3G – 1080p (@ 50, 59.94, and 60 Hz), 2k
5 = Unknown
X# = Input video format for DSC HD-3G A:
0 = No signal detected on the current input
1 = HDMI
2 = DVI
3 = Invalid signal
X$ = Horizontal or vertical start — 0 through 255 (default midpoint = 128)
Response is 3 digits, padded with zeros.
X^ = Total lines:*
DSC 3G-HD A: View only
DSC HD-3G A: ±512 of the default value
Response is 4 digits, padded with zeros.
X& = Total pixels:*
DSC 3G-HD A: View only
DSC HD-3G A: ±512 of the default value
Response is 4 digits, padded with zeros.
X* = Active pixels:*
DSC 3G-HD A: View only
DSC HD-3G A: ±512 of the default value
Response is 4 digits, padded with zeros.
X( = Active lines:*
DSC 3G-HD A: View only
DSC HD-3G A: ±256 of the default value
Response is 4 digits, padded with zeros.
X1) = On or off (enable or disable)
0 = Off or disable
1 = On or enable
X1@ = Internal temperature (in degrees Celsius)
Response is 2 digits, padded with a zero.
X1# = Horizontal and vertical frequencies
Format is 3 digits with a single decimal place and leading zeros. (Example: 075.3 )
X1$ = Text label or preset name (up to 16 characters)
NOTE: User and input presets saved without a name are given the default names
“User Preset nn” (for example, User Preset 11) or Input Preset nnn (for
example, Input Preset 005).
DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control 43