Extron Electronics DSC HD-3G A User Guide - Manual (Page 72)

Starting the Control Program
To start the PCS Control Software program:
1. To run the PCS control program, do either of the following:
• Double-click on the EAF.exe file, located on your computer at
c:\Program Files [or Program Files(x86)]\Extron\Extron PCS.
• Access the program from the Start menu on your computer as follows:
a. Click Start on your computer screen.
b. Select All Programs from the Start menu.
c. From the All Programs menu, select Extron Electronics .
d. From the Extron Electronics drop-down submenu, select the Extron
Product Configuration Software folder.
e. From the folder submenu, select Extron Product Configuration
Software .
The Extron Product Configuration Software window opens.
Figure 34. New PCS Software Window
2. On the PCS main window, click the Help icon in the upper-right corner for the
procedures for connecting to the DSC and configuring it (see figure 34).
DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control 66