Extron Electronics FOX DA8 User Guide - Manual (Page 13)

System Operation
After the transmitter, the FOX DA8, the receivers, and their connected devices are powered
up, the system is fully operational. If any problems are encountered, ensure all traditional
and fiber cables are routed and connected properly:
z Ensure that the video source and the displays are properly connected to the transmitter,
the FOX DA8, and the receivers, and that all equipment has power applied.
z Ensure that the rear panel Input monitoring LED (see figure 2, item b ) is indicating
correctly for your system configuration.
NOTE: If problems persist, call the Extron S3 Sales & Technical Support Hotline (see
Contact Information for the phone number in your region of the world).
Extron FOX DA8 • Installation and Operation 7