Panels and cabling, Installation overview – Extron Electronics HAE 100 User Guide User Manual
Page 8
Advertising
Panels and
Cabling
This section provides information on:
z
z
z
z
z
z
Installation Overview
1.
Make sure that the input source, the HAE 100, and all output devices are turned off.
Disconnect all power sources.
2.
If necessary, mount the unit (
).
3.
Connect an HDMI input device (
).
4.
Connect an HDMI output device (
).
NOTE: It is not required to connect an HDMI output device.
5.
Connect audio devices to the analog and/or S/PDIF outputs (
).
6.
Set the Audio Format toggle switch as desired (
).
7.
Set the DIP switches as desired (
8.
Plug in the power supply for the HAE 100 (
) and all necessary devices. Turn on
all devices.
NOTE: See the "
" section on page 10 for audio and video issues.
HAE 100 HDMI Audio Extractor • Panels and Cabling
3
Advertising