Preferences menu, Preferences menu -29, Preliminar y – Extron Electronics Matrix 12800 Series User Guide User Manual

Page 62

Advertising
background image

3-29

Matrix 12800 Switchers • Virtualization/Control Software

PRELIMINAR

Y

Preferences menu

Immediate Changes

—

Causes changes to take effect

immediately.

Hold/Verify Changes

—

Delays implementation of changes

until the Changes – Take button is pressed.

Show all tie-lines

—

Causes the main screen to display all

ties at once, as shown in figure 3-2.

Show 1 input’s tie-lines

—

Because the Show all tie-lines

selection can be confusing, this selection removes all

of the tie lines from the main screen. The main screen

shows all of the ties for one input only when you rest

the mouse cursor over that input or one of its outputs.

Hide Virts ties w/Physical

—

Hides the virtual ties when you select the Edit Mode

Physical display.

Show Virts ties w/Physical

—

Shows the virtual ties when you select the Edit

Mode Physical display.

Frequency-read Options

—

Allows you to enable or disable periodic DSVP input

frequency reads.

Limit ties to same Video Type

—

Limits ties to the same video type (RGBHV,

component, and the like).

Icons in I/O Boxes

—

Displays icons, if assigned, in the virtual input and

virtual output boxes on the main screen.

Numbers in I/O Boxes

—

Displays virtual input numbers in the virtual

input boxes and virtual output numbers in the virtual output boxes.

Ties as Lines

—

Displays ties as lines (figure 3-19).

Figure 3-19 — Ties shown as lines

Advertising