Extron Electronics MS9400 HD FrEND - Manual (Page 41)

MS9400 HD FrEND User Guide Chapter 6: Remote Control Protocol
41 Rev. 1.54
PLAYBACK COMMANDS:
LoadClip <Channel list> <mediapath> <clip>
Load a clip to a channel list. This command provides an alternative interface to the playlist commands. The
LoadClip interface allows a control system to remotely manage playback on the player.
The loaded file will begin playing.
The Player will respond with
Fileplaying 1 /media/clipname.mpg or ERROR
Play <Channel list>
Play the currently loaded playlist after a PAUSE command.
ƒ To play a new file, use the LOADCLIP command.
ƒ To play a new playlist, use the LOADPLAYLIST command mentioned in the preceding section.
The Player will respond with
OK or ERROR
Stop <Channel list>
Stops the currently playing file and turn video off.
The Player will respond with
OK or ERROR
Pause <Channel list>
Pauses the currently playing file.
The Player will respond with
OK or ERROR
Audioon <Channel list>
Turn audio on for the requested channel.
The Player will respond with
OK or ERROR