Extron Electronics IPL 250 Setup Guide - Manual (Page 15)

2-5
Refer also to the IPL 250 Reference Manual at www.extron.com.
IPL 250 • Setup
Infrared (e, IR)
IR
1
S G S G
2
IPL 250
Rear Panel
To Projector, Panel Display,
or Source Device’s
WiredIR Remote Port
IR Output
Ground
( )
Relay ports (f)
RELAY
1 2
Closed Normally
open
IPL 250
Rear Panel
To Room
Control
Equipment
Mounting
Mount the IPL and other devices and attach cables using the preceding wiring
section as a guide. Optional rack shelves and an assortment of mounting kits
(such as back of the rack, furniture, and projector pole mount kits) are available
for use with the IPL. Refer to the IPL 250 Reference Manual for part numbers
of these accessories, and read the instructions that come with the rack shelf or
mounting kit for installation procedures.