Extron Electronics JPEG 2000 Encoder - Manual (Page 12)

Transferring a license to a different PC
Follow the steps below to transfer the full license to another computer if needed. You can
also use this procedure to transfer the full license back to the original computer if needed.
1. From the Help menu, select Licensing and Activation . The Licensing and
Activation screen opens. Make a note of the original license key.
2. Click Transfer Code . A transfer code is generated and the original PC now has the lite
version of the JPEG 2000 Encoder. Make a note of this transfer code.
3. With the JPEG 2000 Encoder open on the new PC, enter the old license key into the
License Key field of the Licensing and Activation screen.
4. Click Get to obtain seed information. This text appears in the Seed section.
5. Copy and paste the old license key, the transfer code you obtained on the original PC,
and the new PC seed information into an e-mail to Extron.
6. Send the e-mail.
7. In response, you receive a new activation code for the new PC via e-mail. Copy and
paste it into the
Activation Key field of the Licensing and Activation screen.
8. Click Activate . A dialog box opens confirming the activation.
9. Click OK in the dialog box.
10. Click OK to exit the Licensing and Activation screen.
JPEG 2000 Encoder • Introduction and Installation 8