Extron Electronics JPEG 2000 Encoder - Manual (Page 33)

3. Click OK to return to the main screen or click Cancel to return to the main screen
without adding a machine. The computer IP address or name appears in the Remote
Machines section of the main screen. The following states can appear beside each listed
remote machine:
z
Ready — Indicates that the computer is available for encoding tasks
z
Unavailable — Indicates that the computer is not connected. Check with your
network administrator to ensure that necessary connections are in place and that
the JPEG 2000 Encoder software (same version) is loaded on the remote device.
4. Repeat steps 1 through 3 to add more remote machines as needed. The system is now
set up for processing data over multiple machines.
To remove a computer from a multiple-encoding array:
1. In the Remote Machines section of the main screen, select one of the listed computers
by clicking on it.
2. Press the <Delete> key on your keyboard.
JPEG 2000 Encoder • Encoding Procedure 29