Powercage 1600 front panel port, control, and, Indicators – Extron Electronics PowerCage FOX 3G HD-SDI User Guide User Manual

Page 15

Advertising
background image

PowerCage 1600 Front Panel Port, Control, and Indicators

The front panel of the PowerCage 1600 Enclosure contains the following:

PowerCage 1600

COMM

1

POWER

ALARM

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

1

PSU

2

PSU

1

FAN

2

FAN

COMM

SELECT

CONFIG

TEMP

1

Board Status LEDs

for Multi-function Boards

(up to 16 optional boards)

3

Fan

Status

LEDs

5

Config-

uration

Port

(RS-232)

4

Communi-

cation

Selection

Button

6

System

Temperature

Status LED

2

Power

Supply

Status

LEDs

Figure 5.

The PowerCage 1600 Enclosure Front Panel

a

Board status LEDs: Comm, Power, Alarm (16 board locations) — There is

one set of these LEDs for each of the 16 rear panel slots that is available for boards. If
a board is installed in the identically-numbered slot, the LEDs light under the following
circumstances:

COMM

1

POWER

ALARM

Alarm LED — Lights when the fiber link on a PowerCage FOX board is

broken or disconnected. This feature depends on the model of
PowerCage board.

Comm LED —

Lights when the corresponding board is selected and

can be communicated with via the front panel Config port.

Power LED — Lights when the corresponding board is receiving power.

b

Power supply (PSU) status LEDs (2 power locations) — These pairs of LEDs

correspond to the primary (included) power supply and the redundant (optional)
power supply. For each power supply, the LEDs light as follows:

1

PSU

2

PSU

Alarm LED — Lights when the power supply malfunctions, such as

providing an overvoltage (14 VDC or more) or an undervoltage
(10.5 VDC or less).

Power LED — Lights when the power supply is receiving power.

c

Fan status LEDs (2 fan locations) — These pairs of LEDs indicate whether the

two fans are functioning correctly. For each fan, the LEDs light as follows:

1

FAN

2

FAN

Alarm LED — Lights when the corresponding fan malfunctions.

Power LED — Lights when the corresponding fan is receiving power.

CAUTION: If a power supply or fan status Alarm LED lights, remove power from

the unit and contact Extron S3 Sales & Technical Support Hotline.

PowerCage Fox 3G HD-SDI • Installation

9

Advertising