Extron Electronics PowerCage FOX 3G HD-SDI User Guide - Manual (Page 28)

Figure 20. Choose Firmware File Window
5. Navigate to and select the new firmware file, which has a .bin extension.
CAUTION: The firmware file must have a .bin extension. Other file types can
cause the transceiver to stop functioning.
6. Click Open . The Choose Firmware File window closes.
NOTE: When downloaded from the Extron website, the firmware is placed in a
subfolder of C:\Program Files\Extron\Firmware or
C:\Program Files (x86)\Extron\Firmware (for Windows 7).
7. On the Firmware Loader window, click Begin .
The Total Progress and Progress status bars show the progress of the upload. The
firmware upload to the unit may take several minutes. Once the status bars have
progressed from 0% to 100%, and Status is listed as Completed, the firmware loader
utility resets the unit.
7
Figure 21. Firmware Loader Screen
8. Click Exit to close the Firmware Loader.
PowerCage Fox 3G HD-SDI • Remote Communication and Control 22