Extron Electronics RGB 580xi User Guide - Manual (Page 22)

Symbol Definitions
] = CR/LF (carriage return/line feed, hex 0D 0A)
• = Space
X! = Shift control range (-63 to +63)
X@ = Controller firmware version (listed to two decimal places: x.xx)
X# = Frequency in Hz or kHz (listed as xxx.xx)
Command ASCII (host to interface) Response
(interface to host) Additional
Description
Chn ] Contact closure has been detected across pins 1 and 2.
NOTE: Whenever the Input select button on the AAP device is pressed, contact closure is initiated at the
RGB 580xi remote interface and a signal is sent from the RS-232 port of the remote interface.
Horizontal shift
Specify horizontal shift X! H Hph X!] Set horizontal shift value
Shift right one step {H Hph X!] Increment up
Shift left one step }H Hph X!] Increment down
Firmware version, part number, information requests, and reset
Query firmware version
number Q/q X@] Display version (Ver. x.xx)
Request part number 7 N/n N_60-362-01 ] Display part number of interface
Request information I/i Hph X!• Hrt X@• Vrt X#] Display status
RGB 580xi • Connection and Configuration
18