Extron Electronics TLP 710TV User Guide - Manual (Page 40)

9. On the Add TouchPanel dialog box, do the following:
Figure 38. Add TouchPanel Dialog Box
a. Ensure the correct TouchLink panel model is selected from the drop-down menu
and enter the IP address.
b. Set the Telnet port (usually 23) and, if necessary, enter the password.
c. Check the Import/Apply Layout check box and click OK .
The window now shows the GUI from the TouchLink panel.
Figure 39. Touchpanel GUI Loaded Onto Global Configurator 3
10. Use Global Configurator to associate functions with the screen elements designed in
GUI Configurator (see the Global Configurator help file).
11. Save the configuration and upload it to the controller.
TLP 710MV and TLP 710TV • Configuration Software 34