Tp t 15hd av transmitter, Tp t bnc da4 transmitter/distribution amplifier, Compatibility between products – Extron Electronics TP T Series Transmitters User Guide User Manual

Page 10: Preliminar y, Introduction, cont’d

Advertising
background image

Introduction, cont’d

TP T Series Transmitters • Introduction

1-4

PRELIMINAR

Y

Output

— An RJ-45 connector provides a connection to an Extron TP R receiver.

Horizontal shift

— Allows you to adjust the horizontal placement of the computer

video image on the screen. This is also called “horizontal centering”.

DDSP

™

(Digital Display Sync Processing

™

)

— Allows the sync signal to pass through

without altering sync pulse timing or width.

TP T 15HD AV transmitter

Video inputs —

Computer video

— Accepts computer analog video on a female 15-pin HD

connector. With an adapter cable, the transmitter can accept a Macintosh

video, 13W3 video, or RGBHV, RGBS, RGsB, component video, S-video, or

single source composite video input.

N

Only bi-level sync is supported with component video.

Composite video

— Accepts NTSC, PAL, and SECAM composite video on an RCA

jack.

Audio input

— Accepts PC audio on a 3.5 mm stereo mini jack, and stereo audio on

two RCA jacks.

Outputs

— Two RJ-45 connectors provide connections to a TP RGB video receiver and

a TP composite video receiver:

Buffered local monitor output

— Allows you to view the displayed computer

video image on a local monitor that is located up to 100 feet from the

transmitter, without signal reflections or crosstalk.

Horizontal shift

— Allows you to adjust the horizontal placement of the computer

video image on the screen. This is also called “horizontal centering”.

DDSP

™

(Digital Display Sync Processing

™

)

— Allows the sync signal to pass through

without altering sync pulse timing or width.

TP T BNC DA4 transmitter/distribution amplifier

Video input

— Accepts RGBHV, RGBS, RGsB, component, and composite video

on BNC connectors. With an adapter cable, the transmitter can also accept an

S-video input.

N

Only bi-level sync is supported with component video.

Outputs

— Four individually isolated, buffered, and amplified outputs on RJ-45

connectors allow connection to up to four Extron TP receivers.

Compatibility between products

The TP T 15HD AV is backward compatible with the TP T 15HD A and the

TP T BNC DA4. However, the TP T 15HD A and the TP T BNC DA4 (products

whose part numbers end in -02) are not forward compatible with the TP T 15HD AV

(whose part number ends in -03).

Advertising