Extron Electronics SW4 3G HD-SDI User Guide - Manual (Page 22)

SW4 3G HD-SDI • Installation and Operation
Installation and Operation, cont’d
2-8
AUTO
SWITCH
ACTIVE
SW4 3G HD-SDI
MULTI-RATE SDI SWITCHER
1
MODE
2
NORMAL
3
AUTO
4
RATE
NOT
RECOGNIZED
270 Mbps
1.485 Gbps
2.97 Gbps
Turning on auto-input switch mode
The Auto Switch Active LED lights, indicating that
auto-input switching is enabled.
To select normal mode (turn auto-input switch mode off),
1
. Press and hold the Mode (Input 1) button.
2. While holding down the Mode button, press and hold the
Normal (Input 2) button.
3 . Release the Mode and Normal buttons simultaneously.
AUTO
SWITCH
ACTIVE
SW4 3G HD-SDI
MULTI-RATE SDI SWITCHER
1
MODE
2
NORMAL
3
AUTO
4
RATE
NOT
RECOGNIZED
270 Mbps
1.485 Gbps
2.97 Gbps
Turning off auto-input switch mode
The Auto Switch Active LED turns off, and the switcher
switches to the previously selected input.
N If power is disconnected from the switcher, the unit retains
mode and input settings.