Extron Electronics SW HDMI LC User Guide - Manual (Page 15)

SW HDMI LC • Operation 9
Operation
This section describes the operation of the SW HDMI LC switchers, including:
z z Front Panel Features
z z
Operations
Front Panel Features
SW2 HDMI LC
HDMI SWITCHER
1 2 IR
1 2
AUTO
SWITCH
ACTIVE
SIGNAL
2 1 3
4
Figure 8. SW2 HDMI LC Front Panel
SW4 HDMI LC
HDMI SWITCHER
1 2 3
SIGNAL
IR 4
1 2 3 4
AUTO
SWITCH
ACTIVE
3 2 1
4
Figure 9. SW4 HDMI LC Front Panel
a Auto Switch LED — This LED lights when auto-input switching is in effect. See
“ Enabling Auto-input Switching ” in the “Installation” section for the procedure to
set up auto-input switching.
b IR receiver port — This sensor detects IR signals from the optional IR 102 remote
control at a distance of up to 30 feet (9.1 m) and within 40 degrees of the axis.
(See “
Using the Optional IR 102 Remote Control , ” later in this section, for more
information.)