Command/response table for sis commands, continued – Extron Electronics SW HDMI LC User Guide User Manual
Page 22
SW HDMI LC • Remote Communication and Control
16
Command
ASCII Command
(host to unit)
Response
(unit to host)
Additional Description
Request information, part number, and firmware version (continued)
Request part number
N
60-xxxx-01
]
Show the switcher part number:
SW2 HDMI LC: 60-1159-01
SW4 HDMI LC: 60-1160-01
Query firmware version
Q
X%
]
Show the current firmware build number
X%
,
expressed to the second decimal place.
Example:
Q
1.01
]
Query auto-input switch status
72#
Asw
X@
]
Show On or Off status of auto-input switching.
For
X@
:
0 = disabled
1 = enabled
Reset
Reset
E
ZXXX
}
Zpx
]
Reset the switcher to its factory default values.
Upload firmware
Upload firmware
E
Upload
}
...go
Upl
]
Upload a new firmware version from the
computer. “Upl” appears after the upload is
complete.
Command/response Table for SIS commands, Continued