Extron Electronics System 4xi Series User Manual

Page 12

Advertising
background image

Chapter 1 • Introduction and Features

Extron • System 4

xi

Switcher Series • User’s Manual

Multiple Switcher Applications

The features of the System 4

xi

can be further expanded by connecting the output

from another switcher to Input #4. The System 4

xi

then functions as the “master”,

communicating with the projector and providing it with a signal improved by any
of the features described in this section and, if required, can even control the
connected projector using their IR (Infra-Red) remote control, RS-232 control, or
the built-in LCD menu-driven System 4

xi

front panel control.

Picture Control Memory

All inputs, including those in multiple switcher applications, have a separate
memory block for all picture controls of video or RGB and audio signals. When a
different video input is selected, the picture controls are updated automatically
from the information stored in the Picture Control Memory. RGB inputs in pass-
through mode have no stored picture control information.

Internal Power Supply with Automatic Switching

The System 4

xi

is equipped with an internal auto-switching power supply that

operates from any input voltage in the 100-240 VAC range, at 50/60Hz.

Universal Projector Control

The E

XTRON

System 4

xi

and the projector operate as a system that can be

controlled several ways:

•

through existing projector controls

•

through the System 4

xi

panel

•

through a host system using the RS-232 port

•

using Extron’s Windows® Control software

Using the projector-brand remote control, the System 4

xi

can be made to control

the following operations:

•

switch inputs

•

control projector power

•

mute the audio or video signals

•

switch input memory blocks (in projector) for convergence

•

setup saved configurations within the connected projector by input selection

•

monitor the projector for update changes, feature changes, or input selection

changes by the user

The above operations can also be accomplished by using the System 4

xi

front

panel controls or through a PC or other control system. The System 4

xi

switcher

will communicate with the projector and pass it the desired command.

When a projector manufacturer introduces a new model, the System 4

xi

can be

upgraded to accommodate it by a simple EPROM change (free during the
warranty period of two years). When a totally new projector brand and model is
introduced, Extron will either add it to the compatibility list for EPROM upgrades,
or make it an available “standard” with all future System 4

xi

switchers. Call

Extron with details of your requirements.

The unique control features of the System 4

xi

make using its switcher functions

exactly the same as using the projector-brand switcher, but with a 300 MHz
bandwidth performance — nearly three times that of most projector- brand
switchers.

_______ Some projector IR remotes do not communicate with the System 4

xi

. Also, all

projectors have different methods for source and memory recall of source inputs.
Please refer to your specific installation instructions for further details.

1-3

Advertising