Extron Electronics System 5 IP Series User Guide - Manual (Page 99)

6-5 System 5 IP Switchers • Special Applications
10. Click the Button Modes selection list and select toggle mode.
11. If desired, configure function/room button 2’s lights.
a. Click Add below the Button Operations area at the bottom of the GC
window. The Add Button Operation window appears.
b. Configure the function/room button to light green (or another color of
your choice) on the first (Action #1) press, as shown in the picture below,
and click OK.
c. Click Add. The Add Button Operation window appears.