Gotham CANDÉO LED - Manual (Page 5)

Part No. CJ520348
©2007 Gotham 1/07
CANDÉO ® LED OPERATIONS MANUAL
LFVRS 9-BUTTON CONTROL STATIC COLOR MODE
Depress buttons 2-4-6-8 (see Figure 8) simultaneously until the indicator lights on the buttons flash, then
select a color by pressing:
1. Cool White
2. White
3. Warm White
4. Yellow
5. Magenta
6. Cyan
7. Red
8. Green
9. Blue
DMX512 CONTROLS
Candéo
®
LED is compatible with DMX512 theatrical control systems. Some sophisticated DMX 512
systems will allow for LED drivers to be individually controlled when networked together. For this to
happen, a unique address must be established for each driver (up to 99 different addresses in each
network). Switch A and B, located on the top of the driver assembly, need to be set so that each driver
can be identified by the DMX512 control (00, 01, 02, 03 etc… see Figure 9). Drivers set to the same
address will behave the same. Candéo LED is designed for compatibility with DMX512 theatrical control
systems with the following pin out configuration of the RJ45 connector (see Figure 10).
Figure 9
5
1 0
DRIVER ONE
SWITCH A SWITCH B
COLOR
SWITCH
0
2
DMX512 OUT
COLOR
SWITCH
SWITCH A SWITCH B
DRIVER TWO
DMX512 IN