Gotham CANDÉO LED - Manual (Page 6)

Part No. CJ520348
©2007 Gotham 1/07
CANDÉO ® LED OPERATIONS MANUAL
Wiring configuration for T-568A on both ends:
PIN1
(white/green) PIN1
PIN2 (green) PIN2
PIN3 (white/orange) PIN3
PIN4 (blue) PIN4
PIN5 white/blue) PIN5
PIN6 (orange) PIN6
PIN7 (white/brown) PIN7
PIN8 (brown) PIN8
Figure 10
LED DRIVER SELF-TEST MODE (see Figure 11)
LED
DRIVER
Figure 11
6
COLOR SWITCH SWITCH B
SWITCH A
0
1
2
3
4
5
6
7
8
9
COLOR SWITCH SWITCH B
SWITCH A
This document may also be accessed at www.gothamlighting.com.
1. Set switches A and B to 7.
2. Set the color switch to 9.
The LEDs will emit the following sequence of light in two-second intervals: white-red-green-blue.
The LEDs will then begin to flash yellow for 10 seconds.
3. While flashing yellow, set switches A and B to 0.
If LEDs begin to flash green, the system is normal. If the LEDs flash red, document the number of
flashes and contact Gotham Technical Support at 1-800-315-4982.