Imetec BELLISSIMA ABSOLUTE BA8 230I - Manual (Page 12)

10
While straightening, careful not to near the plates too much •
to the sensitive parts of the face, ears, neck or head
Once finished using, leave the plates to cool down
•
completely before putting them away.
ATTENTION!
When using the appliance, if the LCD display (2) starts •
to flash, it means there is a malfunctioning. In such
case, we recommended switching off the appliance
removing the plug from the mains, therefore taking the
product to the nearest client’s after-sales assistance
centre.
This appliance is equipped with quick heating plates.
•
Careful not to get burnt.
After having finished using the hair straighteners,
•
ensure they have completely cooled down before
putting them back in the case (or inside any bag).
Never wrap the power supply cable around the
•
appliance.
USE
PREPARING THE HAIR
Wash hair as normal and comb removing knots •
Dry the hair and brush from the roots to the points •
FUNCTIONING
Connect the power supply plug (10) to an electric socket •
Slide the On/Off button (5) to switch-on the appliance; the •
LCD display (2) switches on
To activate the ION Infrared function, press the ION
•
Infrared button (6) for a few seconds: the Infrared
symbol appears on the display. It is however possible
to use the plates without the ION Infrared Technology:
if activated, deactivate it by pressing the ION Infrared
button (6) for a few seconds
EN
MI000338_cs3.indd 10 12-05-2010 14:50:11