02_xst21154_istr_en.qxd_02_xst21154_istr_en.qxd – Imetec LIVING AIR B1-100 User Manual

Page 5

Advertising
background image

E
N

G

L

I

S
H

7

6

INSTRUCTIONS AND WARNINGS FOR CORRECT AND SAFE USE

CAREFULLY READ THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL AND KEEP THEM FOR
FUTURE REFERENCE. THEY SUPPLY IMPORTANT INSTRUCTIONS REGARDING OPERATIONS AND
SAFETY FOR PRODUCT INSTALLATION, USE AND MAINTENANCE.

P L E A S E N O T E

G E N E R A L W A R N I N G S

IMETEC thanks you for choosing this product. We are certain that you will appreciate the quality, reliability and regard for the consumer
with which it was designed and produced.

G E N E R A L I N S T R U C T I O N S

APPLIANCE A

• Power selector switch [Fig. A]

POSITION

FUNCTION

Appliance off

Warm air (1100W)

Hot air (2200W)

APPLIANCE B

• Power selector switch [Fig. E]

POSITION

FUNCTION

Appliance off

Cold air

Warm air (1000W)

Hot air (2000W)

• Thermostat - [Fig. C]
The thermostat maintains the desired temperature: once reached, the appliance automatically turns off and will turn on again as soon
as the temperature level drops.

POSITION

FUNCTION

1

Antifreeze

MAX

Maximum temperature

APPLIANCE C - C1

• Power selector switch [Fig. B]

POSITION

FUNCTION

Appliance off

Cold air

Warm air (1100W)

Hot air (2200W)

• Thermostat - [Fig. D]

POSITION

FUNCTION

1

Antifreeze

MAX

Maximum temperature

The thermostat maintains the desired temperature: once reached, the appliance automatically turns off and will turn on again as soon
as the temperature level drops.

APPLIANCE AND ACCESSORIES DESCRIPTION

[Fig. Z]

a Controls cover

h Grip or space for wall mounting bracket (rear)

b Thermostat

i Cord rewinder

c Timer

j Electro Block

®

protection system

d Power selector switch

k Wall mounting bracket

e On/off light

l Screws and pegs for wall mounting

f Motor unit and ventilation screen (front)

m Ionizer indicator light (only for models with ionizer)

g Ventilation screen

n Ionizer indicator light key (only for models with ionizer)

1. After unpacking, make sure that the appliance is intact with no visible signs of damage caused by transport. Should you have

any doubts, do not use the appliance and take it to an authorised IMETEC Service Centre.

2. Before connecting the appliance, check that the rating plate specifications correspond to the electrical mains supply. The plate

is on the bottom of the appliance.

3. Do not use adapters, multiple sockets and/or extension leads. If the appliance's plug and the socket are incompatible, have the

socket replaced with a suitable type by professionally qualified staff.

4. This appliance must only be used for the purpose for which it has been designed, that is, as a fan heater for home use. Any other

use is to be considered improper and therefore hazardous. The manufacturer cannot be held responsible for any damage due to
improper or incorrect use.

5. Certain fundamental guidelines must be respected when using any sort of electrical appliance. Specifically:

- never touch the appliance with hands or feet that are wet or damp;
- do not pull the power cord or the appliance to remove the plug from the socket;
- do not expose the appliance to the elements (rain, sun, etc.);
- do not let children or incapable persons use the appliance without supervision;
- always disconnect the appliance when left unattended;
- never use the appliance with an external timer or a remote control system or similar devices.

6. Do not place the appliance directly beneath an electrical socket. Do not use this product within the immediate vicinities of a

bathtub, shower or swimming pool. Do not place this product within reach of a bathtub, shower or swimming pool.

7. Before carrying out any cleaning or maintenance, disconnect the appliance from the mains by removing the plug.
8. Should the appliance break down and/or not function properly, disconnect it and do not tamper with it. Should it need repairing,

take it to an authorised IMETEC Service Centre.

9. The power cord must never be replaced by the user. If the cord is damaged or needs replacing, contact an authorised IMETEC

Service Centre.

10. Should you decide not to use this appliance anymore, make it inoperative by cutting the power cord after removing the plug from

the socket. We also recommend making all potentially dangerous parts of the appliance harmless, particularly for children who
might be tempted to play with it.

11. This appliance should not be used by children or persons with partially reduced physical, sensorial or mental faculties, and in

any case not without specific knowledge and experience, or without the supervision or instructions for use provided by a
responsible person.

12. Children must not be allowed to play with the appliance.
13. For models without ambient thermostat:

WARNING: The fan heater is not equipped with a device to control the room temperature. Do not use this fan heater in small
rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.

Do not cover the air inlet and outlet grids to avoid the risk of overheating.

All devices must be disposed of in compliance with the instructions provided by the European Standard n. 2002/96/EC. The
recyclable materials used in this appliance can be recovered to prevent environmental degradation. For further information,
please contact your local waste disposal authority or your retailer.

Advertising
This manual is related to the following products: