IPX DDK-1800 User Manual
Page 38
Changing the PPPoE Network Setting.
The Network page has a PPPoE icon the upper left. Follow the steps below to change the PPPoE setting.
1. Click
the
PPPoE
button on the upper left menu to enter the “PPPoE Settings” page.
2.
Activate the “Enable” or “Disable” status of the PPPoE Settings.
3.
Enter the PPPoE “Username” and the PPPoE “Password” then confirm the password again.
4.
Click on the Submit button to save the setting.
NOTE: Please refer to section 4.1.3.8 (PPPoE & DDNS) for more details.
Functions:
PPPoE Setting
If you use the DDK-1800D to connect directly to the Internet, you will need
to enter the username and password which were given to you when you
set up your account with your Internet Service Provider. If the DDK-1800D
is behind a router or a gateway you do not need to configure this setting.
Username:
Enter Username here
Password:
Enter Password here
38