IPX DDK-1500 (NTSC) - Manual (Page 59)

57
5.2 The IP camera IP Surveillance
This section provides instructions for installing and using the IP surveillance and Image Viewer,
which are included with the IP camera. The programs can be operated by a selected PC
equipped with the following requirements.
System Requirements
Intel Pentium 1.5 GHz processor or above (2.8 GHz or higher recommended).
128-MB RAM at least (256-MB or higher recommended).
Windows 2000, XP or above.
4 MB VGA card capable of 24-bit true color display.
100 MB free hard-disk space for software installation.
10/100 Base-TX network for LAN operation.
The Microsoft Internet Explorer 6 above.
In the multi-channel recording mode, the HD data transfer rates must be 66MB or above (100MB
or higher recommended).
5.2.1 Introduction to IP surveillance
The IP surveillance allows you to access many units of the IP camera from a remote desktop
or a laptop in a TCP/IP networking environment. It can perform the following functions.
View live images from the IP camera.
Store, search, and review recorded video from the PC, and SD card.
Change a regular record, event record, and timer properties.
Before you are ready to view images from a desktop, you need to have your IP camera
networked by obtaining a 10/100 base-TX Ethernet data cable (Standard RJ-45) to connect
the IP camera to your LAN/WAN. Now enter the main menu to set the IP address.