IPX DDK-1500 (NTSC) - Manual (Page 57)

55
5.1.8
PPPoE & DDNS
Using the PPPoE
1. Install the XDSL software (obtained from your ISP dealer) in your PC.
2. Search your IP camera's IP address: you can use your Network Viewer's Scan IP program,
or just connect the ipxcam and the Video monitor. The monitor screen will show the IP
address on its right side.
3. Change the switch on the ipxcam's side panel to position # 4.
4. Installing an IP address in your PC or notebook.
Desktop → Move the mouse focus to the Network neighborhood and click the right key of the
mouse → Choose the properties → Choose your local connection → Choose the properties
and select the configuration → Select the TCP / IP → Choose the properties → Type in the
IP address in a four-part formula, for example “192. 168. 1.101” (the first three parts must be
identical to the above numbers, only the last part can be changed to your own number, which
must never exceed 255) → Click the mask and the mask input, namely “255. 255. 255. 0” (a
fixed formula) → Click “OK” → Click “OK”.
5. Desktop → Choose IE browser → Type in the IP camera IP address in the URL (check step
# 2 above) → Enter → ipxcam’s images will appear.
PPPoE Settings
1. Enter the IP camera home page → Choose the network → Type in “User Name: root” and
“Password: Admin” → Click “OK’.
2. Choose PPPoE → PPPoE mode: Select “ON” → Type in “Account” → Type in “Password”
→ Submit → Unplug the power connection.
3. Plug in the IP camera and it will receive an IP address from the ISP dealer (this IP address
is dynamic --- every time you unplug and plug in again you’ll get a new IP address).