IPX VE-3500 - Manual (Page 13)

12. Power ON the Video Server and it will work normally if the entire update procedure goes
correctly.
13. Verify the version of the system software.
WARNING :
1. Don’t use FAT32 or NTFS or other file formats in step 1.
2. Steps 1 to 3 have to be done on a PC.
3. Make sure the file of UPDATE.BIN is a correct one in step 3, or the VIDEO SERVER will
not work normally after being updated.
4. If the power of the VIDEO SERVER is suddenly lost in step 8, please remove the SD card
first and turn on the VIDEO SERVER next to test its operation. If the VIDEO SERVER
remains working normally, please go back to step 4; otherwise, please inform your
technical support.
5. In step 10, if the SD card is not removed and the Video Server does not get online as well,
the updating process must be repeated again after rebooting the Video Server.
6. Make sure that the SD card is inserted in a correct position in step 5, or the Video Server
will suffer permanent physical damage.
7. If the message "CSUM ERROR" appears in step 8, it implies a problem in the file of
UPDATE.BIN.
8. Don’t interrupt the process while the unit is updating itself; proceed with an SD card
not including any system software of the unit, or else the unit will crash.
11