IPX DDK-1500D User Manual
Page 38
38
z
Change the Network Setting — PPPoE.
The “Network” page has, on its upper left, the “PPPoE” icon. Please follow the steps below to change the
PPPoE setting through the network if necessary.
1. Click
the
PPPoE button at upper left above to enter the “PPPoE Setting” page.
2.
Please read the “PPPoE Troubleshooting” document first, then press “Close’ button.
3.
Click the “PPPoE mode” to activate the function.
4.
Type in the PPPoE “Account” and the PPPoE “Password”.
5. Click
the
Submit button to submit the new setting.
6. Click
the
Home button to return to the home page.
NOTE: Please refer to section 5.1.8 (PPPoE & DDNS) for more details.
Description of function keys:
PPPoE mode: Click your choices to enable the PPPoE function.
Account: Enter it in the given space.
Password: Enter it in the required space.
Submit: Click to set.