Lenmar MSC366 - Manual (Page 3)

• If the battery is attached, and the status indicator is showing “Stand By” (indicated by the MED light flashing and all other lights off), the battery
may not be making proper contact to the adapter plate. Unplug the unit and check that the battery is attached correctly. Also, make sure the adapter
plate is the proper one and that it is securely attached to the charger base.
•
Use a clean dry cloth when necessary to keep the metal contacts of both charger and battery clean.
Cautions:
•
For use with 3.6 or 6V NiCd / NiMH batteries ONLY! Use with other type batteries voids warranty, may cause damage to the charger / battery and
possibly cause injury to the user.
•
Do not leave battery connected to camcorder or camera when not in use.
•
Do not leave the battery connected to the charger for prolonged periods. Remove the battery after charge is complete.
• Unplug the charger when not in use.
•
Do not use, place or store the charger where it may come into contact with water or moisture.
•
Always replace frayed or damaged wire and broken plugs immediately.
• Use this charger with the power adapters included in the package only.
•
No user serviceable parts, opening chassis will void warranty.
The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel Environmental
Justice Foundation against multiple electronics and appliance manufacturers
WARNING: Handling the cord on this product will expose you to lead, a chemical known to the state of California to cause birth defects or
other reproductive harm. Wash hands after handling.
Note: Batteries will self discharge when not in use whether they are installed in a camcorder, digital camera or not. Batteries can be
kept fresh if you recharge them every 2-3 months. NiCD batteries should be stored uncharged.
Specifications:
•
AC Adapter: 110 – 240VAC, 50 / 60Hz
•
Power Input: 12-18 VDC @ 2A
•
Charge Method: Patented Neotherm Charging Technology
•
Charge Rate: Variable, Continuously Adjusted via
Microprocessor
Limited 3 Year Warranty
This limited warranty starts from the date of original purchase and expires 3 years thereafter. If, during this period, any part, because
of manufacturing defects or workmanship fails to function properly under normal use will be repaired at no charge for parts and labor
or, at our option, the product will be replaced. The following is excluded: damages from delay or loss of use of equipment, or
damaged batteries, malfunctions resulting from misuse, tampering, unauthorized repairs, modifications, or accident.
Package the unit and its accessories carefully using ample padding material to prevent damage in transit and ship it prepaid and
insured to:
Lenmar Enterprises, Inc.
4035 Via Pescador
Camarillo, CA 93012
When sending in product for service, your package should include evidence of date and place of purchase. Enclose $10.00 for
shipping and handling for addresses in the U.S. For outside the U.S. and Canada, freight will vary depending upon ship to address.
For additional questions, comments or to explore other Lenmar battery solutions, visit our web site at: www.Lenmar.com or call us
at 805/384-9600