NZXT Sentry LX - Manual (Page 7)

NZXT. 5
3. Use the “Up and Down Arrow” to adjust the settings.
4. The Sentry LX will exit the temperature alarm setting
mode at after idling or at the end of the “SET” button
scroll.
Changing between Fahrenheit and Celsius
Hold the “Up Arrow” Button in order to chance between F and C.
Sound Alarm
The sound alarm will go off under the following conditions
1. when a fan is detached during operation
2. when temperature goes over the maximum temperature
set during “Temperature Alarm Settings”
Pushing any button during the alarm sound process will disable the
sound early.
Reset to Default settings
Simply pressing the “RESET” key will return the meter to factory
settings. NOTE: All previous settings will be deleted.
Support and Service
If you have any more questions or have problems with the
NZXT product you purchased, please don’t hesitate to
contact
[email protected] along with a detailed explanation of your
problem and your proof of purchase. You may inquire about
replacement parts at
[email protected] .
Thank you again for purchasing an NZXT case. If you have
any more comments or questions. Please visit our website or send
us an email.
NZXT Website: www.nzxt.com
Email our design team: [email protected]