Andrew James AJ000260 Electric Carving Knife - Manual (Page 5)

5
How to use your electric knife

Remove the motor and the blades from the box.

Wipe all parts with a moist cloth to remove any dust or dirt.

Warning: Only hold the
blades near the ends or
by the plastic handles.

Interlock the blades
together before
inserting them into the
appliance. To assemble
the blades, hold the
shaft ends below the plastic handles and slip the rivet into the hole onto the
tip of the other blade (fig 1). Move the blades together ensuring the tips
remain attached.

Hold the assembled blades by the plastic handles and insert the blades into
the blade slot, pushing
them until both blades are locked into position. You
will hear a “click” sound to signal that the blades are in the correct position.

Insert the plug into a power outlet and ensure the cord is clear from the
blades, then switch it on.

Please note that for safety
reasons the knife can only be
used if buttons 2 and 3 are
pushed in at the same time
(Fig 2), this acts as a safety
function.

Please be aware for the best results you should select the correct set of
blades for the correct food type (see part list for details).

Do not apply much force when cutting, allow the knife to do the cutting.

After use, remove the plug from the socket and take the blades out by
pressing the release button 1 (Fig 2).
Fig 2
1.Blade release button
2. Switch 1
3.
Switch 2