Kendall Howard 1915-3-700-12 12U Corner Wall Mount Cabinet User Manual
Page 2
Tools/Hardware needed:
Screw Driver
and/or Drill
You may also need:
Mounting screws
and anchors
Qty 1:
Corner Wall Mount
Cabinet
What’s in the box?
Step 1:
Step 3:
Step 4:
Step 2:
Remove mounting frame from wall mount cabinet. Turn
mounting frame so that the eight beveled tabs face up. Posi-
tion the mounting frame in corner and use the obround
(oblong) holes to secure the mounting frame to the corner.
Once mounting frame is secured to corner, lift and lower the
wall mount cabinet so that each of the eight (8) beveled tabs
slide into the eight (8) slots in the back of the wall mount cab-
inet.
Install screws from the inside of the cabinet(not provided) in
these six (6) locations BEFORE installing any equipment in the
cabinet.
(Optional) Install wall mounting screws (not provided) for
additional security in these eight (8) locations to secure the
cabinet to the mounting frame.