Kendall Howard 5200-3-500-xx Performance Accessory Bar - Manual (Page 2)

Tools Needed:
Included:
2
(4x) Channel Nut 3/8 in.
(4x) Bolt 3/8 - 16 x 1.5 in.
(2x) Mounting Brackets
7/32” Hex Wrench
(1x) Accessory Bar
Assembly - Step 1:
Assembly - Step 2:
3
Slide both Mounting Brackets on both ends of Accessory Bar.
Place Channel Nuts behind inside Flanges of Uprights. Install
Bolts through Mounting Bracket into Channel Nuts.