Kendall Howard 5200-3-600-13 LAN Station Racking System - Manual

Copyright 2008 Kendall Howard LLC All Rights Reserved
To begin the installation, assemble the
left and right sides using 2 rails and 2
mounting plates with the 8 screws
provided. Repeat to create the other
side.
1 2
Place the left and right sides so that
the mounting holes line up with the
pre-drilled holes in the bottom of the
work surface and attach with 4 screws.
Attach the front and rear spacers with the
4 provided screws. If you would like
added stability, you may use the
provided wood screws to attach the
bottom brackets directly to the bottom
shelving.
Performance Racking Installation Instructions
3