SM Pro Audio M-Patch 5.1: Passive Surround Monitor Controller - Manual (Page 14)

SPECIFICATIONS
Audio Inputs • 1 x D-Sub 25-pin (surround + L/R)
• 6 x Unbalanced RCA (surround)
• 2 x Unbalanced RCA (L/R)
• 2 x Balanced 1/4” TRS
Audio Outputs • 2 x Balanced XLR (L/R)
• 6 x Balanced 1/4” TRS (surround)
Link Output • 1 x D-Sub 25-pin (surround + L/R)
Power AC Mains; Internal Switching, 100V-240VAC
(Note: AC power required only to illuminate the unit’s LEDs. All other functions
of the MPatch 5.1 operate fully without the use of AC power.
Dimensions 37cm x 15.5cm x 8.5 cm (w/o rack ears)
Weight 2kg
The information contained in this manual is subject to change without notice. No part of this manual may be reproduced
or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind,
for any purpose, without the express written permission of SM Pro Audio.
All Rights Reserved © 2010 SM Pro Audio
RETURN AUTHORIZATION NUMBER
To obtain warranty service, you must contact SM Pro Audio for a Return Authorization
number before returning the product (Tel.: +61 3 9555 8081; [email protected]).
All inquiries must be accompanied by a description of the problem. No products will be
accepted for warranty service without a Return Authorization number.
The product must be returned in its original shipping carton, together with the Return
Authorization number, to:
SM Pro Audio Service Department, W25 26-28 Roberna St., Moorabbin, Melbourne,
Victoria, Australia 31892.
If the warranty claim proves to be justified, the product will be returned freight prepaid by
SM Pro Audio within Australia.
Outside of Australia, please contact you local distributor for a Return Authorization
number and shipping instructions.
CLAIM FOR DAMAGES
Failure of SM Pro Audio to provide proper warranty service shall not entitle the buyer to
claim (consequential) damages. In no event shall the liability of SM Pro Audio exceed the
invoiced value of the product.
SM PRO AUDIO MP
a
tch 5.1