Smp ro audio mp a tch 5.1, Mpatch 5.1 audio output connections, Output selector switches – SM Pro Audio M-Patch 5.1: Passive Surround Monitor Controller User Manual
Page 8: Tip ring sleeve
SMP RO AUDIO MP
a
tch 5.1
Mpatch 5.1 Audio output Connections
Stereo Operation
The MPatch 5.1 features three sets of outputs.
For monitoring the L/R stereo signal, you would normally use the Stereo Balanced
XLR outputs. If your speakers are unbalanced, you can use this output with an
adaptor that connects to Pin 1 (hot) and Pin 3 of the XLR connector.
The L/R stereo signal also appears at outputs 7 and 8,
respectively, of the D-Sub Slave Output.
5.1 Surround output
These balanced 1/4” TRS outputs
carry the individual 5.1 audio streams.
Power Input
OFF
ON
POWER
L
R
LS
RS
LFE
C
L
R
Balanced
Left
Right
L
R
LS
RS
C
LFE
INPUT B
INPUT D
Stereo Speaker Outs
Surround Speaker Outputs
INPUT A+C
SLAVE OUTPUT
Balanced input and Link to output
(90-240V ac)
Power Input
OFF
ON
POWER
L
R
LS
RS
LFE
C
L
R
Balanced
Left
Right
L
R
LS
RS
C
LFE
INPUT B
INPUT D
Stereo Speaker Outs
Surround Speaker Outputs
INPUT A+C
SLAVE OUTPUT
Balanced input and Link to output
(90-240V ac)
Tip
Ring
Sleeve
SMP RO AUDIO MP
a
tch 5.1
Output selector switches
Master
MPATCH 5.1
Passive volume control
monitor switcher
-20db PAD
SL/SR-MONO
L/R-MONO
C+D
A/B + C/D
A+B
ALL MUTE
LFE
SR
SL
R
C
L
Stereo Monitors
5.1 Surround Monitors
Master
MPATCH 5.1
Passive volume control
monitor switcher
-20db PAD
SL/SR-MONO
L/R-MONO
C+D
A/B + C/D
A+B
ALL MUTE
LFE
SR
SL
R
C
L
Stereo Monitors
5.1 Surround Monitors
Individual mute switches
Mute all outputs
Surround > Mono
Surround input selector
Stereo input selector
-20dB Pad
Surround or
stereo input selector
Stereo > Mono
D-Sub surround outputs 1-6
mirror D-Sub inputs 1-6 (pg. 6).