NXG Technology NX-IMH12 Audio Distribution Panel - Manual (Page 2)

NXG One-Year Limited Warranty
If the NXG product proves to be defective in
workmanship or materials within one year
from the date of the original customer’s pur-
chase, we will, at our option, repair or replace
the defective product.
Limitation of Implied Warranties
Any implied warranties, including warranties
of merchantability and fitness for a particular
purpose, are limited in duration to the length
of this warranty.
Exclusion of Certain Damages
NXG’s liability for any defective product is
limited to repair or replacement of the product
at our option. NXG shall not be liable for inci-
dental or consequential damages of any kind
or character because of product defects.
Some states do not allow limitations on how
long an implied warranty lasts and/or do not
allow the exclusion or limitation of incidental
or consequential damages, so the above limi-
tations and exclusions may not apply.
This Warranty Does Not Cover:
• Damage caused by abuse, accident, misuse,
negligence, or improper operation.
• Any product whose serial number has
been altered, defaced, or removed.
• Products that have been altered or modified.
• Normal wear and maintenance.
• Damages caused by shipping. (All claims
for shipping damage must be made with
the carrier.)
Warranty Service
Warranty service must be performed by an
authorized service center, usually a NXG dealer
or its authorized agent. You may obtain a list of
authorized service centers by contacting NXG.
All warranty repairs must be accompanied by
the original bill of sales. No other document is
acceptable or is required. This warranty gives
you specific legal rights, and you may also have
other rights which vary from state to state.
NXG reserves the right to revise specifications
without notice.
NX-IMH12 Specifications
Power Handling: 120 watts RMS per channel
(suitable for use with 200 watt per channel rated receivers/amplifiers)
Frequency Response: 20 Hz - 22kHz (+0dB, -0dB)
Wire size acceptance: 2 or 4 conductor, stranded, 16 AWG to 12 AWG
Dimensions: 12 1 /
4
˝ (311mm) H x 9 9 /
16
˝ (243mm) W x 3˝ (76mm) D
Maximum Number of Speaker Connections: 12 pairs @ 4 Ω minimum
Maximum Amplifier Impedance with All Zones Connected:
4.7 Ω with 8 Ω speakers connected
4.3 Ω with 4 Ω speakers connected
Designed for use with Class 2 wiring only
16648 North 94th Street
Scottsdale, AZ 85260
1-800-733-0008
www.nxgtech.com
Fig. 3 Typical System Diagram for the NX-IMH12 Audio Distribution Panel
Receiver/Amplifier
Typical Room
Volume Controls
Typical Speakers
NX-IMH12