NXG Technology NX-HDMIS-1x8 - 1 x 8 Splitter - Manual (Page 2)

SPECIFICATIONS
Operating Temperature Range -5 to +35° C (-41 to +95° F)
Operating Humidity Range 5 to 90%RH (No Condensation)
Input Video Signal 0.5-1.0 Volts P-P
Input DDC Signal 5 volts p-p (TTL)
Data Transfer Speed Rate 6.75Gbps(Maximum)
Video Format Supported DTV/HDTV:480i/576i/480P/576P/720P/1080i/1080P/4Kx2K
3D video support
HDMI Output HDMI 1.4+HDCP 1.1
Support Video Color Format xv-YCC/deep color 36bit
Support Audio Format DTS-HD/true-HD/LPCM7.1/AC3/DTS/DSD
Power consumption 10 watts (Maximum)
Dimension (L x W x H) 270 x 110 x 27.5mm
Net Weight 840g
Note: Specifications are subject to change without notice. Mass and dimensions are approximate.
PACKING CONTENTS
1) Main Unit. 8-port HDMI splitter 2) 5VDC Power Supply 3) Operating Instructions
PANEL DESCRIPTIONS
Front Panel
2 3
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
CONNECTING
1) Connect the HDMI signal source into HDMI input
2) Connect the HDMI display devices into HDMI outputs
3) Insert the DC 5v power supply into power input and then connect the AC side of the power
supply into the wall outlet
Notice: Gently Insert/Extract all cables
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or other harsh chemicals
to clean this unit.
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by qualified service personnel if:
(a) The DC power supply cord or AC adaptor has been damaged;
(b) Objects or liquids have damaged the unit;
(c) The unit has been exposed to rain;
(d) The unit does not operate normally or exhibits a significant change in performance;
(e) The unit has been dropped or the cabinet damaged.
2) Servicing the unit: Do not attempt to service the unit beyond that described in these
operating instructions. Refer all other servicing to authorized servicing personnel.
Rear Panel
4) Power input
5) HDMI outputs
6) HDMI input
1) Power LED Input Indicator - The corresponding LED will indicate an active HDMI connection.
2) HDMI output Indicator- The corresponding LED will indicate an active output connection.
3) Power ON/OFF