NXG Technology NX-SSVC6 - Six Zone Automatic Impedance Matching Speaker Selector - Manual (Page 2)

(Continued from front)
Power Handling: 100 watts RMS per channel
Frequency Response: 20 Hz – 22 kHz (+0dB, -0dB)
On/Off Selector Type: Noise-free, front access, pushbuttons
Volume Control: 12 step, rotary, attenuation
Wire Size Acceptance: 2 or 4 conductor, stranded,
16 AWG to 12 AWG
Setting the NX-SSVC6 Volume Controls
This procedure will allow you to properly set the volume of
your system to avoid overdriving the NX-SSVC6 and or your
speakers to avoid damage or amplifier distortion (clipping).
Dimensions: 2 1 /
8
˝ (54mm) H x 16 3 /
4
˝ (425mm) W x 10 1 /
4
˝ (26mm) D
(Depth includes speaker connectors & volume control knobs;
height includes feet)
Maximum Number of Speaker Connections: 6 pairs @ 4 ohm minimum.
Minimum Amplifier Impedance w/All Rooms Selected @ Full Volume Each:
5.3 ohm w/ 8 ohm speakers connected
4.6 ohm w/ 4 ohm speakers connected
Specifications
FIG. 3
1. Set your receiver’s vol-
ume control to the minimum
setting.
2. Turn each volume control
on the NX-SSVC6 to it’s
maximum setting.
3. Now, slowly turn the vol-
ume up on your receiver until
you get the maximum vol-
ume (without distortion) you
want in any given room that’s
connected to the NX-SSVC6.
4. Now you can attenuate
the volume of each room
independently to achieve the
proper listening level in each
room.
Fig. 3 shows a typical system
diagram for the NX-SSVC6
speaker selector.
NXG One-Year Limited Warranty
If the NXG speaker selector proves to be defective in workmanship or materials within
one year from the date of the original customer’s purchase, we will, at our option,
repair or replace the defective product.
Limitation of Implied Warranties
Any implied warranties, including warranties of merchantability and fitness for a par-
ticular purpose, are limited in duration to the length of this warranty.
Exclusion of Certain Damages
NXG’s liability for any defective product is limited to repair or replacement of the prod-
uct at our option. NXG shall not be liable for incidental or consequential damages of
any kind or character because of product defects. Some states do not allow limitations
16648 North 94th Street
Scottsdale, AZ 85260
1-800-733-0008
www.nxgtech.com
This Warranty Does Not Cover:
• Damage caused by abuse, accident, misuse, negligence, or improper operation.
• Any product whose serial number has been altered, defaced, or removed.
• Products that have been altered or modified.
• Normal wear and maintenance.
• Damages caused by shipping. (All claims for shipping damage must be made with
the carrier.)
Warranty Service
Warranty service must be performed by an authorized service center, usually a NXG
speaker systems dealer or its authorized agent. You may obtain a list of authorized service
centers by contacting NXG. All warranty repairs must be accompanied by the original
bill of sales. No other document is acceptable or is required. This warranty gives you
specific legal rights, and you may also have other rights which vary from state to state.
NXG reserves the right to revise speaker system specifications without notice.
on how long an implied warranty lasts and/or do not allow the exclusion or limita-
tionof incidental or consequential damages, so the above limitations and exclusions
may not apply.