NXG Technology NX-SHELF-2 - Manual (Page 5)

P5
STEP 1d
– Attach the wall plate using two wall screws (top and bottom only)
Bubble Level
NOTE: CONCRETE
WALL INSTALLATION
•Insert wall anchors into
concrete wall (part ) 2
Tighten bottom screw once wall
plate is level.
STEP 1e
– Adjust the bottom of the wall plate until it’s level before full tightening the
bottom screw
STEP 1f
– On the two-shelf model insert & tighten the middle wall screw
Middle wall screw location