NXG Technology NX-MOUNT-TLT-L - Manual (Page 10)

P10
STEP 5A- ATTACH PANELTO WALL PLATE & ADJUST TILT ANGLE
Hang vertical rails with flat panel attached
Heavy,
Assistance
Required
Flat Panel
Vertical Rails
Wall Plate
Pull spring lock
cord down and
gently push
bottom of panel
to wall and
release spring
lock. Panel is
now locked on
to wall plate.
Flat Panel
Vertical Rails
Wall Plate
Vertical Rails have 7mm hole located at the
bottom for placement of pad lock for additional
theft security
Locking
Mechanism
STEP 5B- ADDITIONAL SECURITY FEAUTURE (OPTIONAL)
Rotate lever
clockwise to hold
desired tilt